OctuniqueCustom 3D printed figures
Turn a photo, character or idea into a figure you can hold.
A clear route from a pet photo, original drawing or reference image to 3D modeling, printing, hand-painting and delivery—ideal for one-off gifts and small runs.
What this guide covers
3D printing is a practical route from a personal reference to a physical object.
Custom 3D printing works well when you want one meaningful figure or a small run without committing to a large production order. You can start with a clear photo, a drawing, a character sheet or a written idea. The process first builds the 3D form, then prints, refines and hand-paints the physical piece.
Step 1
Share the reference, scale and important details.
One clear image can start the conversation. Multiple views make the result more accurate, especially when the figure needs to capture a pet's markings, a specific pose or a character's back and side details. For pets, a front-facing photo, side view and full-body photo are especially helpful. For characters, send the clearest front, side and back views you have.
Tell us the desired height, display pose, key features you want to retain, delivery country and target date. If you do not know the final size or finish yet, we can help you make the decision before modeling begins.
- Clear photos, original artwork, sketch or character reference
- Preferred height and display pose
- Key visual features that must be retained
- Gift, display, prototype or small-run use case
Step 2
Turn the reference into a 3D model.
The 3D model translates a reference into a form that can be printed. We resolve the front, side and back view; overall proportions; depth of facial features; surface detail; and how the figure will stand or sit securely. If a pose, tail, accessory or display base needs special support, that is addressed before printing.
For a typical 10–15 cm custom 3D printed figure, the indicative starting price is US$167 and includes one modeling phase. A more complex pose, multiple subjects, highly detailed accessory or significant revision scope may require a separate quote.
Step 3
Prepare and print the physical prototype.
Once the model is ready, it is prepared for printing. This includes choosing orientation, planning supports where needed and checking that thin features, small details and the display base are practical at the selected scale. The result is a physical, unpainted figure that can be inspected before final finishing.
3D printing is particularly useful for a one-off figure or a small quantity because it can create a physical object without the mold and production setup normally required for a large manufactured run. If your project later needs 100 or more resin, PVC or soft-vinyl figures, explore our custom collectible figure process.
Planning a 100+ piece collectible run? Explore custom collectible figures →
Step 4
Clean, refine and hand-paint the figure.
A freshly printed object is not yet the final display piece. It goes through finishing work to clean the surface, refine visible areas, prepare it for paint and build the colour layer by layer. Hand-painting is where a pet's markings, a character's expression and small visual details become visible in the finished object.
The aim is not to promise a photographic copy from one image. It is to agree on the most important identity features and reproduce them as faithfully as the chosen size, source reference and process allow. Clear reference photos and a simple approved colour direction create a more predictable result.
Step 5
Confirm the finished figure and prepare it for delivery.
Before delivery, we check the agreed visual points: overall pose, visible surface finish, paint placement, key markings and packaging condition. A simple protective box can be planned for a single display figure, while larger orders can be quoted with packaging appropriate to the quantity and destination.
For a typical 10–15 cm hand-painted 3D printed figure, production takes approximately one week. Shipping is excluded and quoted separately. Final timing changes with model complexity, revisions, surface work, paint detail, quantity, packaging and destination.
- Pose, scale and main visual features
- Paint placement and finished surface
- Protective packaging requirements
- Destination and delivery method
Indicative starting point
Use this as a guide, then request a quote for your exact reference.
Final cost and timing are confirmed after reviewing the size, pose, detail, surface work, paint, quantity, packaging and destination. Shipping is quoted separately.
Custom 3D printed figure FAQ
Questions customers often ask before starting.
Can you make a figure from one photo?
Yes. One clear photo can start the project. More views are recommended for a more accurate likeness, especially for pets, people or three-dimensional characters. We may ask for extra front, side or full-body references before modeling.
Can you make a pet figurine from a photo?
Yes. Send the clearest photos you have, including the face, body shape, coat markings and a pose you like. We identify which features should be prioritized at the selected figure size.
What size can my figure be?
10–15 cm is a common starting range for a hand-painted custom figure. Larger or smaller sizes are possible, but the right size depends on pose stability, detail level, surface finish and intended display.
Does the starting price include 3D modeling?
The indicative US$167 starting point includes one modeling phase for a typical 10–15 cm custom figure. Complex designs, multiple subjects, major model changes, unusual poses or additional accessories are quoted separately.
How long does a custom 3D printed figure take?
Typical production for a 10–15 cm figure is around one week, excluding shipping. The confirmed schedule depends on model complexity, revision scope, finish, painting detail and order quantity.
Can I approve the 3D model before printing?
Yes. The modeling stage is the right point to confirm the pose, proportions and key features before physical printing and finishing begin.
Can you hand-paint the print?
Yes. The figure can be cleaned, finished and hand-painted after printing. The level of paint detail is confirmed from the reference images, target size and project quotation.
Can I order more than one figure?
Yes. Share the quantity you need. 3D printing can suit small quantities; for a larger collectible run, a resin, PVC or soft-vinyl production route may be more appropriate.
Do you ship internationally?
Yes. Delivery options and logistics costs are confirmed based on the figure dimensions, packaging, destination and requested timing.
Can you make a figure based on a character I did not create?
We can manufacture from images or files you are authorized to use. You are responsible for confirming that you own or have permission to use submitted photos, characters and designs.